ARG1210 WLAN 11n High Power AP/Router built-in 4 LAN ports, which fully supports the features and functional compliance of IEEE 802.11b/g/n standard to provide high-speed data transmission up to 300Mbps and can increase the coverage range efficiently.
Features:
Operates on 2.4 GHz frequency band including 11n mode 2T2R MIMO technology for enhanced throughput up to 300Mbps.
Backward compatible with legacy IEEE 802.11g, 802.11b (2.4GHz) standards
High power and high sensitivity for extended coverage.
Configuration and management operated via Web browser with password protected access.
Firmware upgrade via HTTP.
Supports Gateway, Bridge, and WISP mode for wireless networks.
Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x)
Support NAT, SPI (Stateful Packet Inspection) for advanced firewall features
Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps
Supports WMM function to meet the multimedia data bandwidth requirement
Power supply by 12V, 1.5A.
Supports multiple ESSIDs with individual security settings.
Specification
Model
ARG-1210
Standards
IEEE 802.1d (Spanning Tree Protocol)
IEEE 802.11b (11 Mbps Wireless LAN)
IEEE 802.11g (54 Mbps Wireless LAN)
IEEE 802.11n Draft 2.0 (300 Mbps Wireless LAN)
IEEE 802.1x (Network Access Control)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
General
Ethernet port: 5 RJ45 10/100 Mbps data port; one WAN and 4 LAN interface
Flash: 2 MB
Memory: 16 MB SDRAM
Frequency Range
2.400 - 2.483 GHz
Modulation Technologies
802.11b: Direct sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
Home 
Akses Point 
